Ampere

Poll without page-refresh

Article on other languages:

	del.icio.us
	Digg
	Furl
	Reddit
	Rojo
	Add to OnlyWire

For other uses, see Ampere (disambiguation).

Current can be measured by a galvanometer, via the deflection of a magnetic needle in the magnetic field created by the current.

The ampere, in practice often shortened to amp, (symbol: A) is a unit of electric current, or amount of electric charge per second. The ampere is an SI base unit, and is named after André-Marie Ampère, one of the main discoverers of electromagnetism.

1 Definition
2 Realization
3 Proposed future definition
- 3.1 CIPM recommendation
4 See also
5 References
6 External links

Definition

One ampere is defined to be the constant current which will produce a force of 2×10^–7 newton per metre of length between two straight, parallel conductors of infinite length and negligible circular cross section placed one metre apart in a vacuum.^[1]^[2] For a description of this force law, see Serway.^[3] See also Ampère's force law. The ampere is a base unit, along with the metre, kelvin, second, mole, candela and the kilogram: it is defined without reference to the quantity of electric charge.

The S.I. unit of charge, the coulomb, is defined to be the quantity of charge displaced by a one ampere per second.^[4] Conversely, an ampere is one coulomb of charge going past a given point in the duration of one second; that is, in general, charge Q is determined by steady current I flowing per unit time t as:

$Q=It \!\$

Realization

The ampere is most accurately realized using a watt balance, but is in practice maintained via Ohm's Law from the units of EMF and resistance, the volt and the ohm, since the latter two can be tied to physical phenomena that are relatively easy to reproduce, the Josephson junction and the quantum Hall effect, respectively. The official realization of a standard ampere is discussed in NIST Special publication 330 Barry N Taylor (editor) Appendix 2, p. 56.

Proposed future definition

Since a coulomb is approximately equal to 6.24150948×10¹⁸ elementary charges, one ampere is approximately equivalent to 6.24150948×10¹⁸ elementary charges, such as electrons, moving past a boundary in one second.

As with other SI base units, there have been proposals to redefine the kilogram in such a way as to define some presently measured physical constants to fixed values. One proposed definition of the kilogram is:

The kilogram is the mass which would be accelerated at precisely 2×10^-7 m/s² if subjected to the per metre force between two straight parallel conductors of infinite length, of negligible circular cross section, placed 1 metre apart in vacuum, through which flow a constant current of exactly 6 241 509 479 607 717 888 elementary charges per second.

This redefinition of the kilogram has the effect of fixing the elementary charge to be e = 1.60217653×10^-19 C and would result in a functionally equivalent definition for the coulomb as being the sum of exactly 6 241 509 479 607 717 888 elementary charges and the ampere as being the electrical current of exactly 6 241 509 479 607 717 888 elementary charges per second. This is consistent with the current 2002 CODATA value for the elementary charge which is 1.60217653×10^-19 ± 0.00000014×10^-19 C.

CIPM recommendation

International Committee for Weights and Measures (CIPM) Recommendation 1 (CI-2005): Preparative steps towards new definitions of the kilogram, the ampere, the kelvin and the mole in terms of fundamental constants

The International Committee for Weights and Measures (CIPM),

approve in principle the preparation of new definitions and mises en pratique of the kilogram, the ampere and the kelvin so that if the results of experimental measurements over the next few years are indeed acceptable, all having been agreed with the various Consultative Committees and other relevant bodies, the CIPM can prepare proposals to be put to Member States of the Metre Convention in time for possible adoption by the 24th CGPM in 2011;
give consideration to the possibility of redefining, at the same time, the mole in terms of a fixed value of the Avogadro constant;
prepare a Draft Resolution that may be put to the 23rd CGPM in 2007 to alert Member States to these activities;

This SI unit is named after André-Marie Ampère. As with every SI unit whose name is derived from the proper name of a person, the first letter of its symbol is uppercase (A). When an SI unit is spelled out in English, it should always begin with a lowercase letter (ampere), except where any word would be capitalized, such as at the beginning of a sentence or in capitalized material such as a title. Note that "degree Celsius" conforms to this rule because the "d" is lowercase.

— Based on The International System of Units, section 5.2.

References

^ BIPM official definition
^ Paul M. S. Monk, Physical Chemistry: Understanding our Chemical World, John Wiley and Sons, 2004 online.
^ Raymond A Serway & Jewett JW (2006). Serway's principles of physics: a calculus based text, Fourth Edition, Belmont, CA: Thompson Brooks/Cole, p. 746. ISBN 053449143X.
^ BIPM Table 3