Colorburst

Article on other languages:

• Burst-Signal
• 컬러버스트

	del.icio.us
	Digg
	Furl
	Reddit
	Rojo
	Add to OnlyWire

This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed. (January 2008)

In composite video, colorburst is a signal used to keep the chrominance subcarrier synchronized in a color television signal. By synchronizing an oscillator with the colorburst at the beginning of each scan line, a television receiver is able to restore the suppressed carrier of the chrominance signals, and in turn decode the color information.

Explanation

In NTSC, its frequency is 39375/11 kHz or 3.579545 MHz with a phase of 180°, whereas PAL uses a frequency of 4.43361875 MHz, with its phase alternating between 135° and 225° from line to line. SECAM is unique in not having a colorburst signal, since the chrominance signals are encoded using FM rather than QAM.

Since the colorburst signal has a known amplitude, it is sometimes used as a reference level when compensating for amplitude variations in the overall signal.

Crystals

An NTSC or PAL television's color decoder contains a colorburst crystal oscillator. These operate at some multiple of the colorburst frequency, such as 4f = 157.5/11 MHz or 14.318 MHz for NTSC. Because analog color TVs were so common between the 1960s and 2000s, economies of scale have driven down the cost of colorburst crystals, which often find uses in various other applications. Applications of NTSC subcarrier-frequency crystals, with f = 39375000/11 Hz, approx. 3.580 MHz, have included:

See also

• Color framing
• Color subcarrier