 |
del.icio.us |
 |
Digg |
 |
Furl |
 |
|
 |
Rojo |
| Add to OnlyWire |
Polling, or polled operation, in computer science, refers to actively sampling the status of an external device by a client program as a synchronous activity. Polling is most often used in terms of input/output (I/O), and is also referred to as polled I/O or software driven I/O.
Polling is sometimes used synonymously with busy-wait polling. In this situation, when an I/O operation is required the computer does nothing other than check the status of the I/O device until it is ready, at which point the device is accessed. In other words the computer waits until the device is ready. Polling also refers to the situation where a device is repeatedly checked for readiness, and if it is not the computer returns to a different task. Although not as wasteful of CPU cycles as busy-wait, this is generally not as efficient as the alternative to polling, interrupt driven I/O.
In a simple single-purpose system, even busy-wait is perfectly appropriate if no action is possible until the I/O access, but more often than not this was traditionally a consequence of simple hardware or non-multitasking operating systems.
Polling is often intimately involved with very low level hardware. For example, polling a parallel printer port to check whether it is ready for another character involves examining as little as one bit of a byte. That bit represents, at the time of reading, whether a single wire in the printer cable is at low or high voltage. The I/O instruction that reads this byte directly transfers the voltage state of eight real world wires to the eight circuits (flip flops) that make up one byte of a CPU register.
