Article on other languages:
 |
del.icio.us |
 |
Digg |
 |
Furl |
 |
|
 |
Rojo |
| Add to OnlyWire |
The zig-zag in-line package or ZIP was a short-lived packaging technology for integrated circuits, particularly dynamic RAM chips. It was intended as a replacement for dual in-line packaging (DIL or DIP). A ZIP is an integrated circuit encapsulated in a slab of plastic, measuring about 3 mm x 30 mm x 10 mm. The package's pins protrude in two rows from one of the long edges. The two rows are staggered by 1.27 mm (0.05"), giving them a zig-zag appearance, and allowing them to be spaced more closely than a rectangular grid would allow. The pins are inserted into holes in a printed circuit board, with the packages standing at right-angles to the board, allowing them to be placed closer together than DIPs of the same size. ZIPs have now been superseded by surface-mount packages such as the thin small-outline packages (TSOPs) used on single-in-line memory modules (SIMMs) and dual-in-line memory modules (DIMMs).
 ZIP chips in ZIP sockets |
 ZIP chips |
ZIP memory devices are now only to be found in obsolete computers, some of these are:
- Commodore Amiga 500 expansion packs
- Commodore Amiga 3000 on-board memory and some expansion boards
As of 2008, some high-power devices (such as high-voltage op-amp ICs, voltage regulators, and motor driver ICs) are still being manufactured in a package with a zig-zag pinout. [1] These zig-zag packages include variations on the TO220 such as "TO220S", "staggered leads TO-220-11", "staggered leads TO-220-15", and HZIP.
 |
This computer hardware-related article is a stub. You can help Wikipedia by expanding it. |
